Window AC / September 21, 2018 / Aubrette Dumoulin
A window air conditioner is supposed to stay in place. This is different from a portable unit which rests on casters so that you can roll it from room to room. In most cases however a window unit will provide better cooling at a lower price that what a portable air conditioner can offer. Moreover you can install a window unit in each room if necessary. By many estimates having two or three window units is still cheaper than investing in a central system. When you are choosing a window air conditioner it is a smart idea to take measurements of the room you plan to cool.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
The most commonly used air conditioners are window air conditioners. This is due mostly to the fact that they are the cheapest alternative when it comes to cooling our homes. But there are other reasons also. For example they install in a window out of the way. Install it and forget it. These units are also available with electric heat options. Window air conditioners were once so noisy that they were nicknamed window bangers. This term was very accurate and well deserved. However todays window air conditioners are very different from the ones many of us learned to hate.