Window AC / August 30, 2018 / Marphisa Babin
Another huge improvement in window air conditioners is in their appearance. Older models did not blend in very well with their surroundings. They were usually some shade of brown and looked like there was a box in your window. Window air conditioners today are much less obtrusive and look less like boxes. Corners are rounded and colors are much lighter. This gives them a much sleeker look. As with most things once they have been around for awhile cost become more reasonable and less of an obstacle. A window air conditioner can be purchase for less than two hundred dollars and often not much more than one hundred dollars. Of course this is for smaller units. Costs go up as the cooling capacity of the unit increases.
When a small window unit for a large room is not enough a large unit for a small place is waste of money. So you should buy a window air conditioner appropriately based on your room space. For a space up to 350 square feet you would require 8000 BTUs. The number of BTUs grows proportionately according to your space. Window air conditioners have high-energy efficient ratios noise-free and when fitted properly cool an entire space very quickly. There are lots of types of window air conditioners from different companies available at different prices. Companies like Haier Kelon and Carrier have products starting from price ranges as low as $50-$150. They come with quiet operation function timer dehumidification air filters and much more.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.