Window AC / September 23, 2018 / DixieLemieux
Depending on the size and level of insulation of your home one window air conditioner is typically enough to cool one or two rooms but larger units may even be able to cool an entire 2-3 bedroom apartment. Using multiple cooling units in a home will allow each person in the family to keep their room at the temperature they desire. Installing a cooling unit will take anywhere from ten to forty minutes. Choosing the Right Air Conditioner
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
When cooling such a device reduces the humidity in the room. There are certain advantages in it for example in a hot afternoon or after rain when the humidity reaches its maximum 100% and the dehumidification is up to 30-60% it facilitates thermoregulation of the body. Window air conditioners are able not only to cool the air. More expensive and modern models have remote control and can operate in the heating and cleaning mode. They have a wide range of operating temperatures - an average from 18 to 43°C. Powerful differently directed air flow evenly distributes across the area.