Window AC / September 1, 2018 / Babette Arsenault
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
This will help you determine the amount of BTU s necessary to cool your room adequately. For example an 8000 BTU unit will cool a room up to about 350 square feet. Another thing to consider when buying a window unit is any special features that come with the unit. In particular most window units include louvers that let you direct airflow programmable timers so that you can set the unit to turn off or on when you wish and energy efficient features like multiple fan speeds. Many units also come standard with a remote control so that you can adjust the temperature from across the room.
Why are window air conditioners so loud? Well the reason is simple: because the entire air conditioner - the compressor the condenser and the fans - are all located in one single unit. By contrast with a split ac and a central air conditioner the compressor and condenser are installed outside of your home. That means that in those units the loudest parts arent in your home. With a window unit however the noisiest parts of the unit are inside your home. This can be a minor annoyance. It may mean that you have to turn up the volume on the tv to hear it. But it can also mean sleepless nights if your window air conditioner in your bedroom is deafening.