Window AC / July 5, 2018 / Babette Arsenault.
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.
To help make that decision more clear I will explore some of the positives and negatives of the two major options. Ductless split type units are also becoming more of an option. I will do another article on that option. To include that in this article would just be more confusing. So for now we will just look at window air conditioners and central air conditioning. Central air conditioning is the best way to go if you already have a central hot air heating system already installed in your house or building. The advantage that you have is that you already have the air handler or blower part already installed.
Installing Your New Air Conditioner. Before you remove your new A/C from its packaging youll need to recruit a helper. Air conditioners are very hard to grip because their weight is uneven and dropping the unit from a window could be catastrophic. After you find a friend or family neighbor to help you can begin the installation by installing any mounting brackets that have been provided by the manufacturer. Heavy older units typically come with mounting brackets that help to support the A/C unit using the window sill and outer wall as balancing points. Next attach any extenders that come with your air conditioner.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.