Window AC / September 11, 2018 / Jacqueline Bizier
Have everything ready and laid out before you have unpacked. Have the screen removed from the window. Remember that these only work for windows that can be pulled up. Ones that crank out will not open wide enough nor will they have anything to hold the air conditioner steady. Open up the window as wide as it can go to give yourself a little extra room to work. It is helpful if you have someone there to push down the top sash when the time comes. Make sure the air conditioner is facing the right way. The front which should be inside the room should have the dials and the cord to plug into the wall.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
Window air conditioners came to the market as a solution for people who couldnt afford or did not want central air conditioning. Because central air conditioning can be quite expensive and because many people live in small apartments central air is not for everyone. This led to the advent of window air conditioners. Window air conditioners have a hot coil and a chilled coil along with two fans. The fans blow air over these coils and they in turn suck away the heat and humidity from the room into the outside area providing clean cool air. The capacity of an air conditioner is measured in BTUs. So the size of the air conditioner plays a vital role in determining its cooling capacity.