Window AC / September 20, 2018 / Marphisa Babin
These extenders will fill the space between the unit and the edges of to keep air from leaking out. Youre now ready to open the window from the bottom pain and have your helper raise the A/C into position. Rest the A/C on the window sill and slide the extensions out to fill any gaps. Check the instructions provided with your A/C for the what the correct placement is for your specific appliance. Most air conditioning units should tilt outward to drain any condensation that may accumulate on it. Finally you will fasten the brackets and lower the window pain back to the top of your machine. Sometimes it is wise to fasten the upper window pane in place to avoid movement of your A/C.
Side panels fill the gaps on the sides. These are also very thin so most of the sleeve is uncovered and outside. This allows for placement of ventilation louvers on the sides and top allowing free movement of air. This is the primary difference between the two types. The wide availability of louver space allows the unit to move a lot of air and this means window units can be quite powerful up to 3 tons or 36000 BTU. So window A/Cs can be effective for very large rooms. In contrast a wall air conditioner sleeve is designed for a hole through the wall. Walls vary substantially in thickness.
If you already have a window air conditioning unit and you have noticed recently that it seems to be louder there are few steps you should take. Check to see if the unit is vibrating on the windowsill. It may need to be re-tightened on its shelf. The side panels might also be loose. Inspect those to see if they need tightening. If the unit seems to be vibrating more than normal consider sliding a piece of wood under the unit to secure it. For more tips about finding the best air conditioner check out these helpful guides: Your Guide to Finding Everstar Portable Air Conditioner Parts and Your Guide to Windowless AC Units.