Window AC / September 8, 2018 / Babette Arsenault
A window air conditioner is supposed to stay in place. This is different from a portable unit which rests on casters so that you can roll it from room to room. In most cases however a window unit will provide better cooling at a lower price that what a portable air conditioner can offer. Moreover you can install a window unit in each room if necessary. By many estimates having two or three window units is still cheaper than investing in a central system. When you are choosing a window air conditioner it is a smart idea to take measurements of the room you plan to cool.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
You can not block the air conditioner with curtains for example; otherwise the comfort will be created between the window and curtains but not in the room. Less effective in a larger room. Sometimes price is much the same as of the split-system. One must admit window air conditioners design more compact and reliable compared to split-system. Window air conditioning system consists of a single case. This so-called monoblock is mounted into the window opening or wall. The conditioner case is a big box assembled from metal plastic panels of white gray light brown or other pastel colors. All the filling of indoor and outdoor units of split-system (evaporator condenser compressor fan etc.) is inside the case. There are no any external connecting tubes.