Window AC / September 9, 2018 / Denise Brisette
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
Another huge improvement in window air conditioners is in their appearance. Older models did not blend in very well with their surroundings. They were usually some shade of brown and looked like there was a box in your window. Window air conditioners today are much less obtrusive and look less like boxes. Corners are rounded and colors are much lighter. This gives them a much sleeker look. As with most things once they have been around for awhile cost become more reasonable and less of an obstacle. A window air conditioner can be purchase for less than two hundred dollars and often not much more than one hundred dollars. Of course this is for smaller units. Costs go up as the cooling capacity of the unit increases.
So what you should do? The best thing to do is to check out the sound levels on your window unit before you make your purchase. All air conditioners come with labels specifying the decibels generated by the unit. A high number means a loud machine. For example a unit with a rating of 50 Decibels is 10 times louder than one rated 40 Decibels. The smartest thing to do is to go to a big box store like Target or Walmart and listen to an air conditioner before you buy it. Even if you are looking at a different brand it is important to get a sense of how loud the Decibel ratings are for you. You can do this best by listening to different ac units running.