Window AC / September 23, 2018 / DixieLemieux
Equipped with remote control and electronic thermostat this is a very comfortable machine to operate and should handle bigger jobs perfectly. It is just another example of a highly rated GE window air conditioner. With so much competition in the manufacture and sale of conditioners there are certain models (we are not talking about cheap foreign manufactured models) which cost just a few hundred dollars. However better models cost more and provide better service. Even if you are aware of your requirement from an air conditioner there is always a dilemma as to which type of conditioner should a person choose.
A wall with simple sheet type siding may be only 6 inches thick whereas a brick or stone wall can be much thicker. So wall air conditioner sleeves have ventilation louvers only in the back to avoid louvers being covered by the wall edges. This limits the amount of ventilation space available in turn limiting how powerful the unit can be. Wall air conditioners generally dont get much over 14000 BTU depending on the brand. So are they interchangeable? This question usually arises when someone needs a lot of cooling power in a room without suitable windows for a window unit.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.