Window AC / September 3, 2018 / Francoise Salmons
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.
Have everything ready and laid out before you have unpacked. Have the screen removed from the window. Remember that these only work for windows that can be pulled up. Ones that crank out will not open wide enough nor will they have anything to hold the air conditioner steady. Open up the window as wide as it can go to give yourself a little extra room to work. It is helpful if you have someone there to push down the top sash when the time comes. Make sure the air conditioner is facing the right way. The front which should be inside the room should have the dials and the cord to plug into the wall.
This will help you determine the amount of BTU s necessary to cool your room adequately. For example an 8000 BTU unit will cool a room up to about 350 square feet. Another thing to consider when buying a window unit is any special features that come with the unit. In particular most window units include louvers that let you direct airflow programmable timers so that you can set the unit to turn off or on when you wish and energy efficient features like multiple fan speeds. Many units also come standard with a remote control so that you can adjust the temperature from across the room.