Window AC / September 23, 2018 / DixieLemieux
A window air conditioner is supposed to stay in place. This is different from a portable unit which rests on casters so that you can roll it from room to room. In most cases however a window unit will provide better cooling at a lower price that what a portable air conditioner can offer. Moreover you can install a window unit in each room if necessary. By many estimates having two or three window units is still cheaper than investing in a central system. When you are choosing a window air conditioner it is a smart idea to take measurements of the room you plan to cool.
Air conditioners are old-timers among climatic equipment which provide comfortable conditions for living. The first window air conditioning system was invented in America in 1930s. Such devices became widespread at once due to their simple design low price and rather high power thus making the cooling of individual rooms possible. Buy your conditioner as per the appropriate BTU. It is a measurement of energy abbreviated as BTU which stands for British Thermal Unit. For this purpose you will be required to find the correct BTU of your room. BTU is proportional to the amount of heat a window conditioner will remove from a room.
The back the part that hangs outside should have the vents where water will drip out. Carefully place it on the window sill facing the right way. There should be ridges around the perimeter of the air conditioner to show you where it should line up with the window. Once you have this lined up slide open the side panels. These are designed to fill up the rest of the window that the device does not fill. Slide them as tightly over as you can. Have the top sash of the window lowered carefully and slowly down until it comes into firm contact with the top of the conditioner. The frame should be very tight against it to brace it and keep it from falling.