Window AC / September 10, 2018 / Francoise Salmons
The ductwork for the distribution of the air is also all ready in place. The ductwork may need some modification to make it work well for air conditioning but the major part of it should be adequate. To use the existing furnace and ductwork a coil will need to be installed at the furnace. An outdoor condenser unit will be installed outside and copper tubing will be used to connect the coil to the outdoor unit. Some electrical wiring will need to be done to power the outdoor unit. Low voltage wiring will be needed to hook the thermostat the furnace and the outdoor unit together so that they can talk to each other. Basically the thermostat will just tell the furnace to run the blower on high speed and the outdoor condenser to start up.
The most popular brands of window air conditioners in the US are General Electric LG and Friedrich. You can find these units at various big-box retail stores like Best Buy or Sears as well as at online at merchants like Amazon. The cost of window units varies widely depending primarily on how many BTUs you need. The smallest units can be as well as $180 with the larger units running up to $500. In some climates Summer months can be downright unbearable without an air conditioner. Window A/Cs are less expensive than central air cooling systems and they typically use less energy than whole house systems as well.
If there is no central hot air heating then the installation of central air conditioning can be much more difficult. Many homes that do not have hot air heat also do not have the room to install ductwork. This would eliminate this possibility. If you are in this category you should get a professional to look at your situation to see if central air conditioning can be done. If it is the room available is to enough to do a good job and get large enough ductwork installed then do not force the issue and go another option. Ductless split type air conditioning may be your best option.